Name: PrimaCreator PrimaSelect PLA 1,75 mm 1 kg - Baltas
SKU: 25790563
Price: 508 NOK
Availability: InStock

PrimaCreator PrimaSelect PLA 1,75 mm 1 kg - Baltas | SKU: PRM-13064 | Brand: PrimaCreator | EAN: 7340002120492<br>

weight

Egenskaper

Elastomer, photopolymer and other material which can be used as 3D printing material.

Printmateriale

The colours that can be produced by the printer.

Farge(r) i blekkpatroner

The degree to which light can pass through the material, ranging from fully opaque to completely transparent.

Opasitet

What other brands this brand can be used with.

Merkekompatibilitet

The maximum speed at which a printer can print.

Utskriftshastighet

The amount of energy the material can absorb during a high-rate impact before fracturing, measured in kJ/m².

Slagfasthet

The measure of the material's stiffness or resistance to deformation when subjected to bending, measured in MPa.

Bøyningsmotstand

The maximum stress the material can withstand before yielding during bending, measured in MPa.

Fleksibilitetsstyrke

The highest temperature the tip can safely reach to melt various printing filaments, measured in degrees Celsius.

Maksimum ekstuderingsspisstemperatur

The percentage increase in length that a material can withstand before failure or rupture.

Forlengelse ved brudd

The lowest temperature at which the extruder tip must be maintained to ensure the material flows correctly, measured in °C.

Minimumstemperatur for ekstruder-tupp

The maximum permissible deviation from the nominal diameter of the product, typically measured in millimetres.

Diametertoleranse

The temperature at which a material begins to deform under a specific load, measured in °C.

Vicat-hardhet

The ratio of the density of the substance to the density of a reference substance, measured in g/cm³.

Bestemt gravitasjon

Indicates whether the materials used in the product are free from toxic substances.

Ikke giftig

Vekt og dimensjoner

The measurement or extent of something from side to side.

Bredde

The distance from the front to the back of something.

Dybde

The measurement of the product from head to foot or from base to top.

Høyde

Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.

Vekt

Distance from one side of a body (circle or sphere) to the other side, measured by a straight line passing through the centre of the body.

Diameter

The total extent in length of the wire used as printing material.

Wire lengde

Datainnpakking

The number of individual units contained within a single sales package, measured in pc(s).

Egenskaper
Printmateriale	Polymelkesyre (PLA)
Farge(r) i blekkpatroner	Hvit
Opasitet	Ugjennomsiktig
Merkekompatibilitet	Prima Creator
Utskriftshastighet	100 mm/sek
Slagfasthet	6 kJ/m²
Bøyningsmotstand	2850 MPa
Fleksibilitetsstyrke	72 MPa
Maksimum ekstuderingsspisstemperatur	220 °C
Forlengelse ved brudd	12%
Minimumstemperatur for ekstruder-tupp	190 °C
Diametertoleranse	0,05 mm
Vicat-hardhet	57 °C
Bestemt gravitasjon	1,24 g/cm³
Ikke giftig	Ja

Vekt og dimensjoner
Bredde	222 mm
Dybde	70 mm
Høyde	210 mm
Vekt	1 kg
Diameter	1,75 mm
Wire lengde	335 m

Datainnpakking
Antall per pakke	1 stykker
Pakkebredde	262 mm
Pakkedybde	125 mm
Pakkehøyde	260 mm
Pakketype	Boks

PrimaCreator PrimaSelect PLA 1,75 mm 1 kg - Baltas

508 kr

508 kr

Early Black Friday er i gang: se alle deals

Produktbeskrivelse

PrimaCreator PrimaSelect PLA 1,75 mm 1 kg - Baltas

508 kr

508 kr

Early Black Friday er i gang: se alle deals

PrimaCreator PrimaSelect PLA 1,75 mm 1 kg - Baltas

508 kr

508 kr

Early Black Friday er i gang: se alle deals

Produktbeskrivelse

Spesifikasjoner

PrimaCreator PrimaSelect PLA 1,75 mm 1 kg - Baltas

508 kr

508 kr

Early Black Friday er i gang: se alle deals