Name: eSUN PLA-Basic Polylactic acid (PLA) Red 1 kg
SKU: 26233737
Price: 299 NOK
Availability: InStock

eSUN PLA-Basic Polylactic acid (PLA) Red 1 kg | SKU: PLA-BASIC175P-R1Y1 | Brand: ESUN | EAN: 6922572224735<br>

weight

Egenskaper

Elastomer, photopolymer and other material which can be used as 3D printing material.

Printmateriale

The colours that can be produced by the printer.

Farge(r) i blekkpatroner

The maximum speed at which a printer can print.

Utskriftshastighet

The amount of energy the material can absorb during a high-rate impact before fracturing, measured in kJ/m².

Slagfasthet

The measure of the material's resistance to elastic deformation under tensile stress, measured in MPa.

Strekkfasthet/stivhet

The measure of the material's stiffness or resistance to deformation when subjected to bending, measured in MPa.

Bøyningsmotstand

The maximum stress the material can withstand before yielding during bending, measured in MPa.

Fleksibilitetsstyrke

The highest temperature the tip can safely reach to melt various printing filaments, measured in degrees Celsius.

Maksimum ekstuderingsspisstemperatur

The percentage increase in length that a material can withstand before failure or rupture.

Forlengelse ved brudd

The lowest temperature at which the extruder tip must be maintained to ensure the material flows correctly, measured in °C.

Minimumstemperatur for ekstruder-tupp

Vekt og dimensjoner

The mass per unit volume of the material, measured in kg/m³.

Tetthet

Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.

Vekt

Distance from one side of a body (circle or sphere) to the other side, measured by a straight line passing through the centre of the body.

Diameter

Datainnpakking

The number of individual units contained within a single sales package, measured in pc(s).

eSUN PLA-Basic Polylactic acid (PLA) Red 1 kg

299 kr

299 kr

Early Black Friday er i gang: se alle deals

Produktbeskrivelse

eSUN PLA-Basic Polylactic acid (PLA) Red 1 kg

299 kr

299 kr

Early Black Friday er i gang: se alle deals

Egenskaper
Printmateriale	Polymelkesyre (PLA)
Farge(r) i blekkpatroner	Rød
Utskriftshastighet	300 mm/sek
Slagfasthet	3,25 kJ/m²
Strekkfasthet/stivhet	64,27 MPa
Bøyningsmotstand	3775,06 MPa
Fleksibilitetsstyrke	106,8 MPa
Maksimum ekstuderingsspisstemperatur	230 °C
Forlengelse ved brudd	4,61%
Minimumstemperatur for ekstruder-tupp	210 °C

Vekt og dimensjoner
Tetthet	1240 kg/m³
Vekt	1 kg
Diameter	1,75 mm

Datainnpakking
Antall per pakke	1 stykker

eSUN PLA-Basic Polylactic acid (PLA) Red 1 kg

299 kr

299 kr

Early Black Friday er i gang: se alle deals

Produktbeskrivelse

Spesifikasjoner

eSUN PLA-Basic Polylactic acid (PLA) Red 1 kg

299 kr

299 kr

Early Black Friday er i gang: se alle deals