Name: EPLA-METAL 1,75 mm ANTIQUE BRASS 1 kg (EPLA-METAL-P175AB1)
SKU: 25591708
Price: 379 NOK
Availability: InStock

EPLA-METAL 1,75 mm ANTIQUE BRASS 1 kg (EPLA-METAL-P175AB1) | SKU: EPLA-METAL-P175AB1 | Brand: ESUN | EAN: 6922572202795<br>

weight

Egenskaper

Elastomer, photopolymer and other material which can be used as 3D printing material.

Printmateriale

The colours that can be produced by the printer.

Farge(r) i blekkpatroner

The maximum speed at which a printer can print.

Utskriftshastighet

The amount of energy the material can absorb during a high-rate impact before fracturing, measured in kJ/m².

Slagfasthet

The measure of the material's stiffness or resistance to deformation when subjected to bending, measured in MPa.

Bøyningsmotstand

The maximum stress the material can withstand before yielding during bending, measured in MPa.

Fleksibilitetsstyrke

The highest temperature the tip can safely reach to melt various printing filaments, measured in degrees Celsius.

Maksimum ekstuderingsspisstemperatur

The lowest temperature at which the extruder tip must be maintained to ensure the material flows correctly, measured in °C.

Minimumstemperatur for ekstruder-tupp

The maximum amount of tensile stress that the material can withstand before failure, measured in kPa.

Strekkfasthet

The mass of the material per unit of volume, measured in g/cm².

Massetetthet

Vekt og dimensjoner

Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.

Vekt

Distance from one side of a body (circle or sphere) to the other side, measured by a straight line passing through the centre of the body.

Diameter

Datainnpakking

The number of individual units contained within a single sales package, measured in pc(s).

EPLA-METAL 1,75 mm ANTIQUE BRASS 1 kg (EPLA-METAL-P175AB1)

379 kr

379 kr

Early Black Friday er i gang: se alle deals

Produktbeskrivelse

EPLA-METAL 1,75 mm ANTIQUE BRASS 1 kg (EPLA-METAL-P175AB1)

379 kr

379 kr

Early Black Friday er i gang: se alle deals

Egenskaper
Printmateriale	Polymelkesyre pluss (PLA+)
Farge(r) i blekkpatroner	Messing
Utskriftshastighet	100 mm/sek
Slagfasthet	5,07 kJ/m²
Bøyningsmotstand	3274,63 MPa
Fleksibilitetsstyrke	92,18 MPa
Maksimum ekstuderingsspisstemperatur	230 °C
Minimumstemperatur for ekstruder-tupp	190 °C
Strekkfasthet	63160 kPa
Massetetthet	1,225 g/cm²

Vekt og dimensjoner
Vekt	1 kg
Diameter	1,75 mm

Datainnpakking
Antall per pakke	1 stykker

EPLA-METAL 1,75 mm ANTIQUE BRASS 1 kg (EPLA-METAL-P175AB1)

379 kr

379 kr

Early Black Friday er i gang: se alle deals

Produktbeskrivelse

Spesifikasjoner

EPLA-METAL 1,75 mm ANTIQUE BRASS 1 kg (EPLA-METAL-P175AB1)

379 kr

379 kr

Early Black Friday er i gang: se alle deals