This fascia adaptor will enable you to replace a factory fitted radio with an  aftermarket unit, and retain the original appearance of your dashboard.

Facia Panels aid easy fitment and hold your new aftermarket unit securely within your dash and are designed to keep the factory fitted look of your vehicle.

FITTING KIT INCLUDES THE FOLLOWING:

•  FASCIA SURROUND - GREY WITH FLAT DASH
• QUADLOCK WIRING HARNESS
• FAKRA AERIAL ADAPTOR
• REMOVAL KEYS

FASCIA ADAPTOR WILL FIT THE FOLLOWING VEHICLES WITH A DASH SIMILAR TO THE PICTURE BELOW :

VAUXHALL VECTRA C: 2004-2008

PLEASE NOTE THE DASH NEEDS TO BE FLAT FOR THIS FACIA TO FIT. YOU WILL ALSO NEED A QUADLOCK CONNECTION FOR THIS TO WORK AND WILL NOT WORK FOR VEHICLES WITH ISO CONNECTIONS.

**PLEASE NOTE**

The above is just a guideline. There might be more than one kit available for your vehicle depending on your dash shape and connections. Please make sure that this is the correct kit for your vehicle by first checking that your vehicle is listed above and that the shape of the facia matches your dashboard.

To ensure compatibility, we also recommend that the vehicle connector pictured above is compared to the actual connector on your vehicle. If you purchase this kit and it does not fit your vehicle then you have purchased the incorrect kit for your vehicle.

Fascia Panel: These adaptors will allow you to remove your original factory headunit and replace it with an aftermarket unit. Facia Panels aid easy fitment and hold your new aftermarket unit securely within your dash and are designed to keep the factory fitted look of your vehicle.

Removal keys: Suitable for the removal of car stereos/head units that have four holes for release keys

Wiring Harness: The harness allows you to convert the factory wiring to the ISO connector of the aftermarket headunit. Enabling it to be fitted without cutting any of the original wiring of the vehicle. With vehicles that have the new Fakra or Quadlock connection there is no ignition switched 12v supply. This is usually required for aftermarket head units, and they won't power up with out this being connected)

Aerial Adaptor: An aerial Adaptor is required when you replace the factory head unit with an after market unit.